EN UG-020 Link 6 user guide r1.0 89
Figure 70: Arm calibration status
The arm calibration can be in one of three states.
Table 61: Arm calibration states
State Description
Not Calibrated The controller is switched on and validation of the
calibration file is not yet started.
The neutral calibration package is selected and
used.
The neutral calibration package is used
because the validation of the selected
calibration package fails.
+1 514-277-3777 kinovarobotics.com
© 2022 Kinova inc. All rights reserved.
To Next Page
Loading...
