M55O555A
(1) Dead Battery (2) Jumper Cables (-)
(3) Jumper Cables (+) (4) Helper Battery
If the battery is discharged and the
engine cannot be started, it is possi-
ble to start the engine by connecting
the discharged battery to a battery
from another tractor or other extra
battery.
JUMP STARTING
HOW TO WARM UP ENGINE
1. After starting the engine with the
clutch depressed, make sure that
the shuttle lever is in its neutral po-
sition and release the clutch pedal
slowly for warm-up.
2.
Run the engine around to 1500
rpm for the period of time indicated
in the table below in accordance
with each ambient temperature.
Ambient
temperature
Warm-up period
0
℃
or warmer 5~10 minuites
0
℃
~ -10
℃
10~20 minutes
-10
℃
~ -20
℃
20~30 minutes
-20
℃
or colder
30 minutes or more
Warming up the engine exces-
sively increases fuel consump-
tion and affects the durability
of the tractor negatively.
Never leave the tractor unat-
tended while warming up. It
can cause re and an accident.
WARNING
Be sure to apply parking brake
while warming up the engine.
If the warm-up is skipped or
missed, the tractor can take off
abruptly to cause a fatal accident.
WARNING
regardless of the warming-up time.
6. Do not increase the work load rap-
idly after starting work.
7. Run the engine without load for
approx. 2 to 3 minutes before stop-
ping the engine after work.
To Next Page
Loading...
