ADJUSTING FRONT AXLE PIVOT
(AD)
(1) Adjusting Bolt (2) Lock Nut
M55O787B
If the front axle pivot pin adjustment
is not correct, front wheel vibration
can occur causing vibration in the
steering wheel
ADJUSTING PROCEDURE
Loosen the lock nut, tighten the ad-
justing screw all the way, and then
loosen the screw by 1/6 turn. Re-
tighten the lock nut.
This service can be affected by the
engine sensitively. Therefore, contact
your local KIOTI Dealer for this ser-
vice.
ADJUSTING ENGINE VALVE
CLEARANCE (AE)
If the air cleaner is not in good condi-
tion, the lifetime of the engine can
be shortened, excessive soot can be
produced, and the engine power can
be deteriorated. Therefore, the lter
should be inspected frequently. Its
replacement interval can be changed
according to driving conditions. Re-
place the filter according to the fol-
lowing procedure:
1. Open the hood and check the suc-
tion hose and air cleaner housing
for damage.
REPLACING AIR CLEANER FIL-
TER (AF)
(1) Filter (2) Cap
(3) Evacuator Valve
M55O7B7A
To Next Page
Loading...
