2. Unscrew the air cleaner clip and
remove the cover.
3. Clean the inside of the air cleaner
housing by blowing compressed
air through it.
4. Replace the filter and check the
housing for damage.
5.
Install the cover and x it with the clip.
Use only a genuine lter. Use
of a non-recommended filter
can cause damage to the en-
gine and sensor.
Make sure that no dust enters
the system by installing the
cover rmly.
When removing the filter, be
careful not to let foreign mate-
rial enter the air inlet.
•
•
•
CAUTION
When installing the cover, make
sure that the dust collection
valve is heading down.
•
NOTE
Check the linkage and condition of
the air conditioner hose and pipe.
CHECKING CAB CUSHION
RUBBER (AH)
Check the condition of the cab cush-
ion rubber.
CHECKING AIR CONDITIONER
HOSE (AG)
REPLACING AIR FILTER (AI)
(1) Bolt (2) Filter
1. After loosening bolts from the left
and right side of the cabin roof
then separate the lter.
M55O789B
To Next Page
Loading...
