7
-
3
MAINTENANCE
7
SERVICE SCHEDULE
MAINTENANCE
CoDES
ITEM SERVICE REQUIRED
Engine Oil Check the oil level and add as needed. Do not overll. E
Hydraulic (Trans / Diff.) Fluid Check level and add as needed. D
Engine Air Filter and Air In-
take System
Check for leaks and damaged components. Do not use compressed air to clean
elements.
T
Engine Cooling System
Clean debris from oil cooler, radiator screen and grills. Check coolant level cold,
add premixed coolant as needed.
F, G, AC
Seat Belt Check the condition of seat belt and mounting hardware. Repair or replace as needed.
Tires Check for wear, damaged tires and ensure for proper sized tires and correct air pressure.
Parking Brake Check operation and adjust if required.
Clean Pedals Clean brake pedals, travel control pedal, clutch pedal and footrest area. H
General Items
Check for loose or broken parts, damaged operator cab, instrument operation,
loose wheel nuts / bolts, oil leaks and damaged or missing signs (decals).
Q, AG, AH, AM
P.T.O Inspect the splines. Replaced damaged or missing shields and guards.
Three-point Linkage Check operation and condition of pins, links and bars.
Loader (If Equipped) Check mounting hardware for loose or broken parts.
MAINTENANCE CHECk LIST
DAILy CHECk CHART
※ For detailed information about maintenance codes, refer to the corresponding section in each chapter.
To Next Page
Loading...
