(1) Clutch Pedal
M55O4L7A
CLUTCH PEDAL
Make sure to depress the clutch ped-
al to its end. To start off smoothly, put
the main and range shift levers into
the proper positions and release the
clutch pedal slowly.
It is possible to shift the shuttle shift
lever without depressing the clutch
pedal. However, the clutch pedal
should be depressed in advance
to cut the power before shifting the
main or range shift lever into the de-
sired position. (Power shuttle only)
When releasing the pedal, re-
move your foot from the pedal
slowly to avoid abruptly driv-
ing off.
•
CAUTION
Never put your foot onto the
clutch pedal during driving.
The clutch disc can be worn
prematurely.
Be sure to depress the clutch
pedal fully when shifting. Oth-
erwise, the shift gear can be
broken.
IMPORTANT
BRAKE PEDAL
1. Make sure to link the left and right
brake pedals as shown in the gure
while driving on a road. The tractor
can roll over if depressing only one
brake pedal at a high speed.
2. To make a sharp turn in a work eld,
disengage the left and right brake
pedals to use one brake pedal. Un-
lock the brake lock, and then turn
the steering wheel while depressing
the brake pedal on the turning side.
M55O4L8A
(1) Brake Pedal (L) (2) Brake Pedal (R)
(3) Pedal Interlock
(A) Unlock (B) Lock
To Next Page
Loading...
