Reduce the speed before mov-
ing this lever since it is very
dangerous to switch the driv-
ing direction at a high speed.
•
CAUTION
celerated under 5.6 m/h (9 Km/h)
and then the driving direction is
changed to reverse.
If the shuttle shift lever is placed in
the neutral position from forward or
reverse, the tractor is decelerated
slowly due to shut off the power.
(1) P.T.O Shift Lever
(A) 1st (B) 2nd
P.T.O SHIFT LEVER
M55O4L6A
This lever is used to shift to one of
the 2 P.T.O speeds as follow:
(*): The model for USA has only one
shift range of P.T.O
※ 54 0 RP M with a 2 ,4 44 RP M
engine rate.
※ 1,000 RPM with a 2,493 RPM
engine rate.
(rpm)
Gears 1st 2nd
P.T.O RPM
540(*) 1,000
To prevent injuries:
When connecting, discon
-
necting or cleaning any P.T.O
driven equipment, stop all
rotating parts, stop the engine
and disengage the P.T.O.
•
CAUTION
Never rest your foot on the
clutch pedal during driving.
The clutch disc can be rapidly
worn.
Depress the clutch pedal fully
during shifting. Otherwise, the
life of the shift gear can be re-
duced.
•
•
IMPORTANT
U
WARNING
Ensure that implements and
attachments are properly in-
stalled and that the tractor and
implement PTO RPM ratings
match.
•
WARNING
To Next Page
Loading...
