WORKING LIGHT
(1) Working Light Switch (Front)
(2) Working Light Switch (Rear)
(3) Working Light (Front)
(4) Working Light (Rear)
M55O4N2A
The working lights are installed to the
front and rear sections of the roof,
and their operating buttons are in-
stalled in the right panel in the cabin.
To turn on, position the switch marked
(front) to the "ON" position.
The key switch should be positioned
to the "ON" position to power the
working lights.
Do not drive the tractor on a
road with the work lights "ON"
at night.
The approaching or following
vehicle’s visibility can be dis-
turbed, which is very danger-
ous for both drivers. In this
case, use the hazard lamps.
•
•
WARNING
(1) Wiper Operating Switch (Front)
(2) Wiper Front
WIPER
M55O4N3A
1. To turn on, position the switch
marked (wiper) to the "ON" position.
To Next Page
Loading...
