SHUTTLE SHIFT LEVER
(1) Shuttle Shift Lever
(F) Forward (R) Reverse (N) Neutral
This lever is to select the forward
and reverse driving direction.
Power shuttle model is an electronic
hydraulic shift type which can shift
without the clutch pedal depressed.
Manual model
is a synchronized
mesh type, necessarily stop the ve-
hicle prior to shifting during driving.
Put this lever into the neutral position
when the tractor is not driven. Abrupt
operation of the lever can shorten
the life of the transmission.
M55O4L5A
POWER SHUTTLE
MANUAL
▶ HOW TO USE THE SHUTTLE SHIFT
LEVER
To select the driving direction, if
the shuttle shift lever is pushed for-
ward with lifting slightly, the tractor
is driving forward, and if the shuttle
shift lever is pulled backward with
lifting slightly, the tractor is driving
reverse.
At i nit ial st arting, co ntrol t he
shuttle lever with the engine rpm
decreased. When the tractor is
start ed t o mo ve, de pr ess th e
foot throttle pedal to increase the
speed.
If the transmission temperature is
low, there may be starting-shock
during shifting. Make sure to warm
up the engine before driving the
tractor.
Even at the high speed you can
shift the shuttle lever without de-
pressing clutch pedal. If the shuttle
shift lever is pulled back during
forward driving, the tractor is de-
The synchronized shuttle shift
lever may be shifted while the
tractor is moving slowly and
the clutch is depressed, but
sudden gear shift changes
without clutching may cause
transmission damage.
•
IMPORTANT
To Next Page
Loading...
