Kioti RX6010C - Page 166

7
-
16
RX6010C / RX6010PC
Oil Capacity
15.3 U.S.gal. (58 L)
(1) Oil Dipstick (2) Oil Filler Plug
(3) Air Breather Hose
(A) Oil level is acceptable within range
M55O7C7A
To avoid personal injury:
Be sure to stop the engine
before changing the fluid or
replacing the lter.
Cool down the uid sufcient-
ly. You can get burned by hot
uid.
•
•
CAUTION
To prevent serious damage to
the hydraulic system, use only
a KIOTI genuine lter.
Do not operate the tractor with
heavy load right after chang-
ing the transmission uid. Run
the engine at medium speed
for a few minutes to prevent
damage to the hydraulic sys-
tem.
•
•
IMPORTANT
5. Apply a thin lm of clean oil onto
the O-ring of a new lter.
6. Tighten the lter rmly by hand.
7. Run the engine for a few minutes
and then stop it to check the leak-
age and uid level. Add uid to the
specied level as needed.
(1) Air Bleeding Plug
M55O7B2A
When adding the fluid, un-
screw the bleeding plug on the
top of the hydraulic cylinder.
Otherwise, the uid can over-
ow.
•
IMPORTANT
M55-유럽판-07.indd 16 2011-08-10 오후 2:23:40