There are marks for the fuse capac-
ity and location on the cover of the
fuse panel. Replace the fuse accord-
ing to the following procedure:
1. Turn the key switch to the "OFF"
position and turn off all the electri-
cal devices.
2. Open t he fu se bo x cov er an d
check the fuse in question using
fuse tongs.
H11O655A
3. If the fuse is blown, replace it with
a new fuse with same capacity.
Make sure it is rmly installed.
4. Install the fuse box cover.
Never use a fuse with the ca-
pacity higher than specified
on the fuse box cover.
If using a faulty fuse, steel
wire, or foil, the electrical de-
vice can be damaged or even
catch a re.
•
•
WARNING
If the replaced fuse is blown
soon, it is probable that the wir-
ing system is faulty. In this case,
contact your local KIOTI Dealer.
If the fusible link, relay or other
electrical component is faulty,
contact your local KIOTI Dealer.
•
•
NOTE
To Next Page
Loading...
