RECORD: When these options are checked, motion detection will trigger
immediate recording from the selected cameras.
ALARM OUT: Checking this option will enable the Alarm Output when motion is
detected.
BUZZER: Checking this option will enable the internal buzzer when motion is
detected.
E-MAIL: After you check this option, a motion detection event will initiate an
e-mail being sent to the indicated address/es with a snapshot of that
event as it was captured on the camera (see Section 5.5.12 Email
Settings for information on how to set up the list of email addresses).
UPLOAD If you have established a remote connection between the DVR and a PC
via the internet, and you check the UPLOAD checkbox, then on
detecting a motion the DVR will send a relevant message to the IE
applet (for example: “Device Alarm, Motion Alarm Channel 1”), which
will be displayed in info line at the top right corner of the IE window.
To Next Page
Loading...
