Konig SEC-DVRMON30 - Exit; Logout; Restore Defaults; Save & Exit

- 59 -
5.8.1 Save & Exit
Save all settings and exit the menu.
5.8.2 Exit
Exit the menu without saving any changes.
5.8.3 Restore defaults
Resets all configurations to factory defaults.
5.8.4 Logout
By using this option, you save all newly introduced changes and log out of the system. To be
able to operate the device you need to log in again with the user name and password.
The system language, time, camera PAL/NTSC system, and
network settings (IP address, subnet mask, gateway, HTTP port)
cannot be recovered after restoring to factory defaults.