Korg Krome

Saving data Writing to internal memory
115
Writing to internal memory
Writing a Program or Combination
About the Program and Combination edit
buffer
WhenyouselectaprograminProgP0:Playora
combinationinCombiP0:Play,theprogramor
combinationdataiscalledintotheKROME’sedit
buffer.
WhenyouthenusethevariousProgramor
Combinationpagestoedittheparameters,your
changeswillaffectthedataintheeditbuffer.
Ifyouwishtosavethismodifieddataintointernal
memory,youmu
stperformtheWriteoperation.
WhenyouperformtheWriteoperation,thedatainthe
editbufferiswrittentothespecifiedprogramor
combinationnumberofthespecifiedbank.
Ifyouselectanotherprogramorcombinationwithout
writingyouredits,thedataofthenewlyselected
programorcombinationwilloverwritetheediteddata
intheeditbuffer,andyourchangeswillbelost.
Note: WhenyoupresstheCOMPAREbuttonin
Programmode,orCombinationmode,thedatafrom
memory(i.e.,thecontentsthatwerewritteninto
memory)willbetemporarilycalledintotheeditbuffer.
Thisallowsyoutocompare
thesettingsyouareediting
withtheoriginalun‐editedsettings.
Writing (saving) procedure
TheProgramandCombinationsettingsyou’vemade
inthevariouseditingpagescanbesavedtointernal
memory.Thisactionisreferredtoas“writinga
program”or“writingaCombination.”Ifyouwant
yourediteddatatobepreservedafterthepoweris
turnedoff,youmustperformaWriteoperation.
TherearetwowaystowriteaProgramor
Combination.
•UsetheWRITEbutto
n.
•UsetheWriteProgramorWriteCombination
menucommandsintheupperrightofthedisplay.
Beforeyoucanwritedataintomemory,youmust
turnoffthememoryprotectsettinginGlobal
mode.
Fordetails,pleasesee“Memoryprotect”on
page 117.
Acombinationdoesnotcontaintheactual
programdataforeachtimbre,butsimply
referencesthenumberoftheprogramusedby
eachtimbre.Ifyoueditaprogramthatisusedbya
combination,orexchangeitwithadifferent
programnumber,thesoundofthecombination
willalsochange,reflectingthealteredprogram.
1. Verifythattheprogramorcombinationyouwant
tosaveisselected.
2. PresstheWRITEbutton.
Alternatively,pressthepagemenubuttonintheupper
rightofthedisplay,andselectthemenucommand
“WriteProgram”or“WriteCombination.”
TheWriteProgramorWriteCombinationdialogbox
willappear.
ThisscreenshotisforProgra
mmode
3. Checktheprogram/combinationnamedisplayed
intheupperline(thewritingsource).
4. Ifyouwishtochangethenameoftheprogram/
combination,pressthetexteditbutton.
Thetextdialogboxwillappear.Enterthenameofthe
program/combination.Fordetails,pleasesee“Editing
names”onpage 117.
Afteryouhaveenteredthename,presstheOKbutton
toreturntotheWrit
eProgram/WriteCombination
dialogbox.
5. In“Category,”specifythecategoryoftheProgram/
Combination.
6. Selecta“SubCategory”aswell.
Forcombinations,thecategoryandsub‐categoryyou
specifyherecanbeselectedinthefollowingpages.
ProgP0:Play
“Category”
CombiP0:Play–ProgramT01–08,09–16
“Category”
SeqP0:Play/REC–Prog
ramT01–08,09–16
“Category”
ForPrograms,thecategory/sub‐categoryyouspecify
herecanbeselectedinthefollowingpages.
CombiP0:Play–ProgramT01–08,09–16
“Category”
7. Use“To”tospecifythebankandnumberofthe
writingde
stinationprogram/combination.
UsetheVALUEcontroll
ersortheBANKbuttonsto
makeyourselection.
8. ToexecutetheWriteoperation,presstheWRITE
button.
Alternatively,presstheOKbuttonintheWritedialog
box.
Edit Buer
Write
Select
Internal Memory
Edit
Program
A 0...127
Combination
A 0...127
When you write, the
program or combination
settings will be saved in
internal memory.
When you select a program
or combination, its data is
called from internal memory
into the edit buer.
Editing applies to the data in the edit
buer. Programs or combinations will
play according to the data in the edit
buer.