Korg Krome

Detailed Editing with Combinations Simple editing using the knobs
47
Simple editing using the
knobs
YoucanusetheControlSurfacetoperformavarietyof
edits.
Forexample,youcanusethecontrolsurfacetoadjust
theFiltercutofforresonance.Youcanalsouseitto
varythedepthofaneffect,ortochangethewayin
whichthearpeggiatorgeneratesaphrase.
Fordetails,pleasesee“Realtimecontrolknobs”on
page 25.
Saving a Combination you’ve
edited
Afteryou’veeditedacombination,youmustsaveitif
youwanttokeepthechangesyou’vemade.Ifyoure‐
selectthecombinationorturnoffthepowerbefore
saving,youreditswillbelost.
1. PresstheWRITEbutton.
TheWriteCombinationdialogboxwillappear.Ifyou
wanttochangethewritingdestinationorthename,
maketheappropriatechanges(seepage 117).
2. PresstheWRITEbuttononceagaintosave(write)
thedata.
Fordetails,pleasesee“WritingaProgramor
Combination”onpage 115.
YoucanalsosavecombinationsonanSDcardasPCG
files.
Fordetails,pleasesee“SavingtoSDcard(Media–
Save)”onpage 118.
Detailed Editing with Combinations
Youcaneditthepreloadedcombinations(BanksA–C)
thattheKROMEisshippedwith,orstartwithan
initializedCombinationtocreateyourownoriginal
sounds.
YoucanusethefactoryProgramstocreatenew
Combinations,oruseyourowncustomPrograms.
Note: Ifyou’ reintheprocessofeditingaProgramin
Programmode,andyouusethatProgramina
Combination,you’llhearth
eeditedversionin
Combinationmodeaswell.
About the edit pages
IntheCombiP0:Playpageyoucanselectandplay
combinations.Hereyoucanalsousethecontrol
surface’sknobsandthetone‐adjustfunctionforquick
editing,ortoeditthesettingsofthearpeggiatoror
drumtrack.Intheotherpagesyoucaneditthesound
ingreaterdetail.
Fordetailsoneachmodeandhowtoaccesseachpage,
pleasesee“Basicoperations”onpage 9
.
Parameters
Parameters
Parameters
Parameters
Timbre2
Timbre3
Timbre16
Timbre4
Timbre1
Parameters
Program
Program
Program
Program
Program
AUDIO OUTPUT
L/MONO, R
Master
Eects
1, 2: P9
Total
Eects:
P9
Insert
Eects
1…5: P8
Arpeggio: P7–1, 2, 3, 4, 5
Timbre
Insert Eects
Master Eects
FX Control Bus
Routing: P8-1, 2
DrumTrack: P7–7
Tone Adjust: P0–7
3Band EQ
3Band EQ
3Band EQ
3Band EQ
3Band EQ
Controllers: P1–1
Combinationstructureandcorrespondingpages
P1–1, P2–2, etc. indicate the on-screen pages and tabs used when editing on the KROME.