Korg Krome

Drum Track function settings Drum Track function settings in Combination mode
101
MIDI transmission and reception for
the drum track
InProgrammode,theDrumTrackfunctiontransmits
andreceivesonthefollowingMIDIchannels.
Receive:Ifyou’recontrollingthetriggeringbyplaying
thekeyboard,thedrumtrackwillreceiveontheglobal
MIDIchannel.
Transmit:ThedrumtrackwilltransmitontheMIDI
channelspecifiedbyDrumTrackProgMIDICh
(default:channel10).(Notedataetc.oftheDrumTrack
programwillbetransmitted.)
Note: MIDItransmissionofthepatterndataisenabled
ifDrumTrackProgMIDIOutisselected.Thedefault
settingisoff(unselected).
TheDrumTrackprogramdoesnottransmitorreceive
programchanges.
Drum Track function settings
in Combination mode
UnlikeProgrammode,Combinationmodedoesnot
haveadedicatedtrackfortheDrumTrackfunction.
You’llneedtospecifyatimbre1–16astheoneforuse
bytheDrumTrackprogram.
Thensetthedrumtrack’soutputMIDIchannelOutput
tomatchthetimbre’sMIDIchannelMIDIChannelso
thattheDrumTrackprogramcanbeplayed.
Fordetails,pleasesee“Selecti ngaDrumTr
ackpattern
andDrumTrackprogram”onpage 98.
MIDI transmission and reception for
the drum track
InCombinationmode,theDrumTrackfunction
transmitsandreceivesonthefollowingMIDIchannels.
Receive:Ifyou’recontrollingthetriggeringbyplaying
thekeyboard,thedrumtrackwillreceiveontheglobal
MIDIchannel.
Transmit:ThedrumtrackwilltransmitontheMIDI
channelspecifiedbytheDrumPatternOutputsetting
ofeachcombination.
SetthistomatchtheMIDIchannelofthetimbreyou’ve
specifiedforthedrumprogram.
Ifthetimbre’sStatusisEXTorEX2,thenotedataetc.
oftheDrumTrackpatternwillbetransmitted.
Drum Track function settings
in Sequencer mode
TheparametersfortheDrumTrackfunctionare
structuredinthesamewayasinCombinationmode.
AssigntheDrumTrackprogramtothedesiredtrack1–
16.
However,whileacombinationtriggerstheDrum
TrackpatternontheglobalMIDIchannel,asong
triggerstheDrumTrackpatternontheMIDIchannel
specifiedbytheDrumPatternInput.Normal
lyyou’ll
setthistoTch.WiththeTchsetting,theMIDIchannel
ofthetrackselectedbyTrackSelectwillautomatically
beusedasthetriggerchannel.
Fordetails,pleasesee“SelectingaDrumTrackpattern
andDrumTrackprogram”onpage 98.
InSeq
uencermodeyoucanusetheDrumTrack
functionwhilerealtime‐recordingasongtrackor
pattern.
Thenote‐
on/offdatatransmittedbytheDrumTrack
patterncanberecordedaseventsinatrackorpattern.
Youcan’tusenotedatafromtheinternal
sequencerasatriggertostartpatternsforthe
DrumTrackfunction.
Whenyou’veusedtheDrumTrackfunct
ionwitha
programorcombinationtocomeupwithanideafora
song,youcanthenusetheAutoSongSetupfunctionto
immediatelystartrealtime‐recording(seepage 59).
MIDI transmission and reception for
the drum track
InSequencermode,theDrumTrackfunctiontransmits
andreceivesonthefollowingMIDIchannels.
Receive:ThedrumtrackwillreceiveontheMIDI
channelspecifiedbytheDrumPatternInputsettingof
eachsong.Normallyyou’llsetthistoTchandusethe
KROME’skeyboardtocontrolthetriggering.
Transmit:ThedrumtrackwilltransmitontheMIDI
channelspecifiedbytheDrumPatternOutputsetting
ofeachsong.SetthistomatchtheMIDIchannelofthe
MIDItrackwhereyou’veassignedthedrumprogram.
Ifthetrack’sStatusisBTH,EXT,orEX2,notedataetc.
oftheDrumTrackpatternwillbetransmitted.