Korg Krome

Creating songs (Sequencer mode)
64
Recording System Exclusive
events
ExclusivemessagesreceivedfromanexternalMIDI
deviceortheparameterchangesproducedwhenyou
editatrackparameteroreffectparametercanbe
recordedinrealtimeonanytrack.
Duringplayback,theexclusivemessagesyourecorded
willcontrolthetrackparametersandeffectparameters
ofthesong,andcanbesenttoexternalMIDIdevices.
Note: YoucanusethemenucommandPutEffect
SettingtoT
racktoinsertanexclusiveeventcontaining
theparametersettingsforaninserteffect,mastereffect
ortotaleffectintothedesiredlocationofatrack,so
thatthesesettingswillautomaticallyswitchduring
playback.
GM,XG,andGSexclusivemessagescanbe
recordedonatrack,buttheKROME’stone
generatorwill
notrespondtothesemessages.
Recording internal parameter
changes
YoucanuseSysExforautomationofinternalKROME
effectsandProgramparameters.
Herewe’llexplainhowtorecordinternalparameter
changes.Asanexample,we’llexplainhowparameter
changesrecordedonadifferenttrackcanbeusedto
modifytheparametersoftheinserteffect(IFX1)
appliedtotheprogramoftrack1.
Note: Inordertorecordsystemexclusivemessages,
makesurethattheGlobalP1:MIDI–MIDIRouting
se
ttingEnableExclusiveischecked.GotoGlobal
modeandverifythatthisischecked.
1. SelectthedesiredprogramforMIDItrack1,and
routeittoIFX1.Thenrecordaphraseofabout
six
teenmeasures.
•IntheP0:Play/REC–ProgramT01–08page,use
“ProgramSelect
”toselectthedesiredprogramfor
MIDITrack01.
•IntheP8:Routing/IFX–RoutingT01–08page,route
theMIDITrack01Bus(IFX/Output)SelecttoIFX1.
ThenintheP8:Routing/IFX–InsertFXSetuppage,
selectthedesiredeffectforIFX1.
• SelectMIDITrack01inTrackSelect.Thenpress
theSEQ
UENCERREC(●)buttonandthenthe
START/STOP()button,andrecordaphrase
ofaboutsixteenmeasures.
2. SelectTrack09in“TrackSelect,”andrecord
parameterchangesasdesired.
Note: Forthisexample,selectanemptytrack.Ifyou
wanttorecordontoaMIDItrackthatalreadycontains
data,settheP0:Play/REC–Preferencespage
RecordingSetupto“Overdub,”asdescribedon
page 60.
• SelectTrack09inTrackSelect.Thenpressthe
SEQUENCERREC(●)buttonandthentheSTART/
STOP()button,andbeginrecording.
•A
ttheappropriatetimewhilerecording,adjustthe
parameter(s)thatyouwanttorealtime‐record.
IntheP8:Routing/IFX‐InsertFXSetuppage,select
anothereffectforIFX1,andmodifytheeffect
parametervalues.
Note: Inadditiontoeffectparameterchanges,youcan
alsorecordparameterssuchassoundparameters.For
detailsontheparametersthatca
nberecorded,please
seepage 191oftheParamete
rGuide.
3. Stoprecording.
Note: Exclusivemessagesarealwaysrecordedonthe
currenttrackselectedbyTrackSelect.Inthisexample,
theyarerecordedonMIDItrack9.
Note: IntheMIDIeventeditpageyoucanviewthe
recordedexclusiveeventsandtheirlocation.Exclusive
eventsaredispla
yedas“EXCL”.
Toviewtheseevents,gototheP6:TrackEdit–Track
Editpage,andselectthemenucommandMIDIEvent
Edit.ThenintheSetEventFiltersdialogbox,check
ExclusiveandpresstheOKbutton.
Exclusiveeventscannotbechangedtoadifferent
typeofevent.Norcanothereventsbechanged
intoexclusiveevents.
4. Ifyougotothepage(e.g.,P8:Routing/IFX)that
showstheparametersyouadjustedinrealtime,
youcanwatchtherecordedchangesbereproduced
whilethesongplaysback.