Korg Krome

Using Effects
78
Effects in each mode
Program mode
Forprograms,youcanuseinserteffectstoprocessthe
finalsoundinthesamewaythatyouusetheFilter,
Driver,Amplifier,andEQ(equalizer)toprocessthe
soundfromtheoscillators(OSC1&2).Next,the
mastereffectsareusedtocreateoverallambiencesuch
asreverb,andyouusethetotaleffecttomakefinal
adjustments.Youcanapplyaneffectinthesameway
totheoutp
utofadrumtrackprogram.Allofthese
settingscanbemadeindependentlyforeachprogram.
Combination and Sequencer modes
InCombinationandSequencermodes,youcanusethe
trackEQandinserteffectstoprocessthesoundofeach
timbre/trackprogram.Thenyoucanusethemaster
effectstocreateoverallambience,andusethetotal
effecttomakefinaladjustments.
InCombinationmode,youcanadjustthesesettingsfor
eachcom
bination,andinSequencermodeyoucan
adjustthemforeachsong.
InSequenc
ermode,youcanswitchbetweeneffectsor
modifytheeffectparametersandrecordthesechanges,
sothateffectswillswitchautomaticallyoreffect
parameterswillbemodifiedautomaticallyasthesong
playsback.
Programmode
Oscillator1 Filter1 Driver1 Amplier1
Oscillator2 Filter2 Driver2 Amplier2 EQ
EQ
Insert Eect 1–5
Drum Track
Total Eect
Master Eect 1, 2
Return
OUTPUT
L/MONO, R
Send
CombinationandSequencermodes
Timbre 1 /MIDI Track 1 EQ
Timbre 16 /MIDI Track 16 EQ
Insert Eect 1–5 Total Eect
Master Eect 1, 2
Return
OUTPUT
L/MONO, R
Send