Korg Krome

Creating songs (Sequencer mode)
66
Adialogboxwillappear.
6. Setthenumberofmeasuresinthepatterntoa
“Length”of04(fourmeasures),andset“Meter”to
atimesignatureof4/4.PresstheOKbutton.
7. Asnecessary,set“RECResolution”toapply
realtimequantization.
8. Beginrealtimerecording.
Youcanrecordinthesamewayasyoudidwhen
recordingtrackswithLoopAllTracks.(See“LoopAll
Tra
cks”onpage 60)
PresstheSEQUENCERREC(● )button,andthenpress
theSTART/STOP()button.
Afterthepre‐count,patternrecordingwillbegin.Play
thekeyboardandusethejoystickandothercontrollers
torecordyourperformance.
Whenyoureachtheendofthepattern,thesequencer
willreturntothebeginningofthepatternandcontinue
recor
ding.Ifyoucontinuerecording,thenewly
recordeddatawillbeaddedtothepreviously‐
recordeddata.
9. Ifyouwanttodeletespecificdatawhileyou
continuepatternrecording,youcanpresstheREC
(●)buttonorcheckthe“RemoveData”checkbox.
Fordetailsrefertostep6of“LoopAllTr
acks”on
page 60.
10. PresstheSTART/STOP()buttontostop
recording.
Ifyoumadeamistakeordecidetore‐record,pressthe
START/STOP()buttontostoprecording,and
presstheCOMPAREbutton.Thenbeginthepattern
recordingprocedureagainasinstep8.
Other way to record
Using the Drum Track function and
the arpeggiator to record on multiple
tracks simultaneously
Youcanusemulti‐recordingtosimultaneouslyrecord
amulti‐trackperformanceusingtheDrumTrack
functionandarpeggiator.
Fordetails,pleasesee“RecordingMIDIinrealtime”
onpage 60.
Using the RPPR function to record on
multiple tracks simultaneously
Youcanusemulti‐recordingtosimultaneouslyrecord
amulti‐trackperformanceusingtheRPPRfunction.
Fordetails,pleasesee“CreatinganRPPRpattern”on
page 71.