Korg Krome

Appendices
130
Error messages
Error and confirmation
messages
A
Are you sure ?
Meaning:Thismessageasksyoutoconfirmexecution.
ToexecutepresstheOKbutton.Tocancel,pressthe
Cancelbutton.
C
Can’t calibrate
Meaning:Calibrationcouldnotbeperformed
correctly.
•Tryagain.
Can’t copy/swap double size effect
Meaning:Whencopyingorswappinganinsertion
effectormastereffect,youattemptedtoplacea
double‐sizeeffectinIFX5andMFX2.
•Modifyyoursettingssothatadouble‐sizeeffectis
notmovedtoIFX5orMFX2,andexecuteagain.
Can’t open pattern Continue?
Meaning:Whenyoufinishedrecording,therewasnot
enoughmemorytoopenthepatternthatwasputinto
thetrack(Whenitmustbeopenedautomatically).If
youpresstheOKbutton,thepatterndatawillbe
deleted,andtherecordedoreditedcontentwillbe
saved.IfyoupresstheCancelbutton,therecorded
co
ntentwillbediscarded.
Completed
Meaning:Theprocessingexecutedbythecommand
hasbeencompleted.
Completed. Please turn the power off, and then
on again
Meaning:ExecutionofUpdateSystemSoftwarehas
beencompletedsuccessfully.Turnthepowerswitch
off,andthenonagaintocompletetheupdate.
D
Destination and source are identical
Meaning:Whencopyingorbouncing,thesamesong,
trackorpatternwasselectedforboththesourceand
destination.Tosolvethisproblem:
• Selectadifferentsong,track,orpatternforthe
sourceanddestination.
Destination from-measure within the limits of
source
Meaning:WhenexecutingtheMoveMeasure
commandforalltracksorwithinthesametrack,the
specifieddestinationmeasureiswithinthesource
range.Tosolvethisproblem:
•Setadestinationmeasurethatisoutsideofthe
sourcerange.
Destination is empty
Meaning:Whenediting,thetrackorpatternthatwas
specifiedasthedestinationcontainsnomusicaldata.
Tosolvethisproblem:
• Selectatrackorpatternthatcontainsmusicaldata.
Destination measure is empty
Meaning:Themeasurethatwasspecifiedasthe
destinationcontainsnodata.
•Specifyadestinationmeasurethatcontainsdata.
Destination song is empty
Meaning:Thesongthatwasspecifiedasthecopy
destinationorbouncedestinationdoesnotexist.
•ExecutetheCreateNewSongcommandinthe
dialogboxthatappearswhenanewsongis
selectedbeforecopyingorbouncing.(Seepage 57)
Directory is not empty Cleanup directory
Are you sure?
Meaning:Whendeletingadirectory,filesor
directoriesexistwithinthatdirectory.
•PresstheOKbuttontodeleteallfilesand/or
directorieswithinthatdirectory.
E
Error in formatting media
Meaning:Anerroroccurredwhileperforminga
physicalformat(fullformat)orhigh‐levelformat
(quickformat)ofthemedia.Tosolvethisproblem:
•Useothermedia.
Error in reading from media
Meaning:Anerroroccurredwhilereadingdatafrom
media.Thiserrormayalsoappearwhendataisbeing
writtentomediabyaSaveorCopyoperation.Tosolve
thisproblem:
•Executethereadingprocedureonceagain.Ifthe
sameerroroccurs,itispossiblethatthedataonthe
mediahasbeendamaged.
Error in writing to media
Meaning:Averificationerroroccurredwhilewriting
datatoamedia.Tosolvethisproblem:
•Itispossiblethatthemediahasbeenphysically
damaged.Tryanothermedia.Avoidusingthe
mediathatproducedtheerror.
F
File already exists
Meaning:WhenexecutingaCreateDirectoryorFile
Renameprocedure,adirectoryorfileofthesame
namealreadyexistsonthemedia.
Meaning:WhenexecutingtheMediamodeUtility
Copycommandwithoutusingwildcards,thecopy
destinationcontainedafileofthesamenameasthe
copysource.
•Eitherdeletetheexistingdirectoryorfile,orspecify
adifferentname.