Korg Krome

Recording Recording multiple tracks from an external sequencer
63
Recording multiple tracks
from an external sequencer
TheplaybackfromanexternalMIDIsequencer
connectedtotheKROMEcanberecorded
simultaneouslyusingmulti‐recording.
1. MakesurethattheMIDIOUTofyourexternal
sequencerisconnectedtotheMIDIINofthe
KROME.
Ifitisnotconnected,turnoffthepower,makethe
connection,andthenturnthepoweron.
2. IntheGlobalP1:MIDI–MIDIBasicpage,set
MIDIClocktoExternalMIDI.Withthissetting,
theKROMEwillsynchronizetoMIDIclock
messagesfromyourexternalsequencer.
MakesurethatReceiveExt.RealtimeCommandsis
checked.
3. CreateanewsonginSequencermode,andinthe
P0:Play/REC–Preferencespage,checktheMulti
RECcheckbox.SetRecordingSetuptoOverwrite.
4. PressPlay/Rec/Mutetoselect“REC”fo
rthetracks
youwanttorecord.
Forthetracksyoudon’twanttorecord,selectPlayor
Mute.
5. IntheP3:TrackParameters–MIDIT01–08and
T09–16page,useMIDIChanneltosp
ecifythe
MIDIchannelofeachtrack.
SettheMIDIchannelofeachKROMEtracktomatch
theMIDIchannelofeachexternalsequence
rtrack.
Datafromeachchannelwillberecordedonthe
correspondingKROMEtrack.
MakesurethatStatusissettoINTorBTH.
6. PresstheLOCATE()buttontosetthelocation
to001:01.000.
7. PresstheSEQUENCERREC(●)buttontoenter
record‐standbymo
de.
8. Startyourexternalsequencer.
TheKROME’ssequencerwillautomaticallybegin
recordingwhenitreceivestheMIDIStartmessage
transmittedbyyourexternalsequencer.
9. Whenplaybackhasended,stopyourexternal
sequencer.
TheKROME’ssequencerwillautomaticallystop
recordingwhenitreceivestheMIDIStopmessage
transmittedbytheext
ernalsequencer.Youcanalso
stoprecordingbypressingtheSTART/STOP()
buttonontheKROME.
Afterthis,youcanplaybackthenewlyrecorded
sequence:
10. IntheGlobalP1:MIDI–MIDIBasicpage,set
MIDIClocktoInternal.
SetTempoModetoAutointheSeqP0:Play/REC–
ProgramT01–08page.
Pre
sstheSTART/STOP()buttontoplayback.
Note: Ifthecorrectsoundsarenotselectedwhenyou
startplayingback,youmaybeabletosolvethe
problembyusingthemenucommandEventEdit(P6:
TrackEdit)tore‐specifytheProgramChangedata.