Korg Krome

Recording Recording patterns
65
Exclusive messages that will be recorded dur-
ing realtime recording
Thefollowingexclusivemessageswillberecorded.
(Seepage 191oftheParameterGuide)
•ExclusivemessagesreceivedfromanexternalMIDI
device.
• ParameterchangesinSequencermode.
•MasterVolumeuniversalsystemexclusive
messagesassignedtoafootpedalorknob.
Using realtime controls to record
changes in a MIDI track’s pan, EQ,
volume, and tone adjust
Bycontrollingthepan,EQ,volume,andtoneadjust
parametersduringrealtimerecording,youcanrecord
thesechangessothattheywillbereflectedduring
playback.
Usemulti‐trackrecordingifyouwanttomodifythe
settingsofmultipletrackssimultaneously.
Note: Controllingtheseparameterswilltransmit
controlchangeorsystemexclusivemessages.Inorder
forthisdatatoberecorded,theGlobalP1:MIDI–MIDI
RoutingEnableControlChangeandEnableExclusive
settingsmustbechecked.Goto
Globalmodeand
verifythattheseitemsarechecked.
Note: UseParam.MIDIOutinGlobalP1:MIDIBasic
pagetospecifywhethercontrolchangemessagesor
systemexclusivemessageswillbetr
ansmittedwhen
youeditthePan(CC#10),Volume(CC#7),orSend1/2
level(CC#93andCC#91)parameters.
Inthiscase,theGlobalP1:MIDI–MIDIRouting
settingsEnableControlChangeandEnableExclusive
mustbecheckedrespectively.
Recording patterns
Recording and editing patterns
Youcanrecordpatternsineitheroftw oways;realtime
recordingorsteprecording.However,patternrealtime
recordingdiffersfromsongrealtimerecordinginthat
youcanuseonlyLooptyperecording.
YoucaneditpatternsbyusingEventEditoperationsto
modifytherecordeddataorinsertnewdata.Youcan
alsousetheGetFromTrackmenucommandto
convertadesire
dregionofperformancedatafroma
MIDItrackintoapattern.Conversely,youcanusethe
PuttoTrackorCopytoTrackmenucommandsto
placeorcopytheperformancedatafromapatterninto
aMIDItrack.
Inaddition,yo
ucanusethe“ConverttoDrumTrack
Pat
tern”pagemenucommandtoconvertauser
patterntoadrumtrackpattern.(See“Convertingtoa
DrumTrackpattern”onpage 103)
Recording patterns in real time
Whenrealtime‐recordingapattern,apatternofthe
specifiednumberofmeasureswillplayback
repeatedly,allowingyoutocontinueaddingmusical
datatoit.
1. Createanewsong,andasdescribedin
“Preparationsforrecording”onpage 57,setthe
tracktotheprogramthatwillbeusedbythe
pattern.
2. AccesstheP10:Pattern/RPPR–PatternEditpage.
3. UseTrackSelecttochoos
ethetrackthatyouwill
usetorecordthepattern.
Thepatternwillplaybackwiththeprogramandother
settingsoftheselectedtrack.
4. Set“Pattern(PatternBank)”toUser,andset
“PatternSelect”toU00.
UserpatternsU00–U99canbecreatedforeachsong.
5. Selectthemenucommand“PatternParameter”.
Pattern Select
Track
Select
Remove Data
REC Resolution