Loading & saving data
120
Loading data
Data that can be loaded
Loading from media
Youcanloadthefollowingdatafrommedia.
• .PCGfile:
Programs,Combinations,DrumKits,Global
settings,UserArpeggioPatterns,andUserDrum
Trackpatterns
• .SNGfile:
Songandcuelist.
• .MIDfile:
StandardMIDIfile(SMF)format
• .EXLfile:
MIDIexclusivedata
Loading the preloaded data and
demo songs to restore the factory
settings
Youcanloadthefactorysettingsanddemosongsback
intotheKROME’sinternalmemory.Fortheprocedure,
pleasesee“Loadingthepreloadeddata”onpage 125.
• Preloaddata:
Programs,Combinations,DrumKits,Global
settings,UserArpeggioPatterns
• Demosongdata
Loading data from SD card
(Media–Load)
Loading all Programs, Combinations,
Drum Kits and Arpeggio patterns
Herewe’llexplainhowtoloadalldatafroma.PCGfile
containingPrograms,Combinations,Drumkits,
Globalsettings,UserArpeggiopatterns,andDrum
Trackpatternsinasingleoperation.
WhenloadingPrograms,Combinations,Songs,or
DrumKits,youmustmakesurethattheGlobal
modememoryprotectsettingisunchecked.For
details,pleasesee“Memoryprotect”onpage 117.
Note: Pleaseseepage 117fordetailsontheSDcard
fromwhichyo
ucanloaddata.
1. Makesurethatthemediaisreadyforyoutoload
data.Fordetails,pleasesee“Inserting/removinga
cardintheSDcardslot”onpage 118.
2. AccesstheMedia–Loadpage.PresstheLoadtab.
3. Pressthe.PCGfilecontainingtheprog
ramand
combinationdatayouwanttoload,sothatthefile
ishighlighted.
•Iftherearedirectories,presstheOpenbuttonto
movetoalowerlevel,orpresstheUpbuttonto
movebacktothehigherlevel.
4. PresstheLoadbutton.Alternatively,choosethe
menucommand“LoadSelected.”
Adialogboxwillappear.
5. Ifyouwanttoloadsongdataatthesametime,
selectthe“Load********.SNGtoo”box.Whenyou
executetheloadoperation,the.SNGfilewillbe
loadedtogetherwiththe.PCGfile.
Use“Select.S
NGAllocation”tospecifythedestination
towhichthesongdatawillbeloaded.
To Next Page
Loading...
