Korg Krome

Basic Information Basic operations
9
Basic operations
Afteryou’veturnedontheKROME,here’showto
performbasicoperations,suchasselectingmodesand
pages.
Selecting modes
InordertouseaparticularfunctionontheKROME,
youmustfirstselecttheappropriatemode.
•Pressoneofthefrontpanelmodebuttonstoenter
thecorrespondingmode.
•Alternatively,youcanpresstheModebutton
locatedintheupperleftofthedisplay,andselect
thedesiredmodefromamenu(seepage 4).
Forasummaryofeachmode,pleasesee“A b o u t the
KROME’smodes”onpage 7.
Note: Theselectedmodeisshownintheupperleftof
thedisplay,andalsoindicatedbythelitstatusofoneof
theabovemodebuttons.
Note: BypressingtheGLOBALorMEDIAbutton
twice,youcanselectthepreviously‐sele
ctedmode
(Combination,Program,orSequencer).
Selecting page group and tabs
Eachmodehasalargenumberofparameters,which
aregroupedintopages.Thesepagesarefurther
subdividedbytabs;withuptotwelvetabsperpage.
•Makesurethatthedesiredmodeisselected.
Forthisexplanationwe’lluseCombinationmodeas
anexample.
Selecting a page group
Moving by selecting a page group
ThePageSelectscreenshowsalistofthepagegroups
withineachmode.Selectthedesiredpagegroupfrom
thislist.
1. PressthePAGEbutton.
Alternatively,youcanaccessthemodemenuandpress
themodebutton,andthenpresstherightsideofthe
menu(seepage 4).
Thepageselectmenuwillappear.
Thepagewhereyouwereimmediatelybefo
repressing
thePAGEbuttonisshowninadarkercolorforyour
reference.
2. Pressthebuttonforthepagethatyouwantto
view.
P0:Playisthepageyou’llnormallyusewhen
performingontheKROME.(Thesameistruein
Programmode.)Editingisdoneinotherpages.
Asanexamplehere,tryselecting“P4Zone/Delay.”The
P4:
Zone/Delay–KeyZT01–08pagewillappear.
Note: Thepagethatappearswillbeshowingthetab
thatyoumostrecentlyselected.
Using the PAGE button plus the numeric keys 0–9
to access different pages
•HolddownthePAGEbuttonandusethenumeric
keys0–9tospecifythepagenumberthatyouwant
toview.
Thespecifiedpagenumberwillappear.Thepage
thatappearswillbeshowingthetabthatyoumost
recentlyselected.
Note: InpagesconsistingofmultiplepagessuchasP5–
1,P5–2,P8–1,andP8–2,thefirstpage(P5–1,orP8–1)
willbeselected.
Using the EXIT button to move between pages
Ifyou’reinapageotherthanpage0(e.g.,ProgP0:
Play)ofeachmode,pressingthisbuttonwilltakeyou
topage0.
Thisbuttonmakesiteasytoreturntothemainpageof
thecurrentmode:
•Pressitoncetogotothepreviously‐selectedtabon
themainP0:Playpage(Play/RECpagein
Sequencermode).
•PressitagaintogotothefirsttabonthemainP0:
Playpage(suchasthemainProgramPlaypage).If
youhadpreviouslyselectedaparameteronthis
page,thatparameterwillbeselected.
•Pressitathirdtimetoselectthemainparameteron
theP0:Playpage,suchastheProgramnamein
Programmode.
COMBIbutton: Combinationmode
PROGbutton: Programmode
SEQbutton: Sequencermode
GLOBALbutton: Globalmode
MEDIAbutton: Mediamode