Korg Krome - Page 14

Introduction to the KROME
10
Whenadialogboxisopen,thisbuttoncancelsthe
settingsmadeinthedialogboxandclosesthedialog
box,justlikepressingtheCancelbutton.
Ifapopupmenuormenuisopen,pressingEXITcloses
themenu.
Selecting pages
•Youcanaccesstabbedpagesbypressingthetabs
showninthebottomlineofthedisplay.
ThisexampleshowstheProgramT01–08page
throughMixerT01–08pageofCombiP0:Play.
Selecting a parameter and editing the
value
1. Presstheparameterthatyouwanttoedit.
2. Ifyouselectaneditcell,thedisplaywillbe
highlighted.Editthevalue.
•Thewaythatthevaluewillchangedependsonthe
typeofparameterorobject.(See“Objectsinthe
display”onpage 4.)
Thevalueintheeditcellcanbeeditedbyusingthe 
valuecontrollers(VALUEdial,INC/DEC
buttons,
numerickeys0–9,–button,(.)button,ENTERbut‐
ton,etc.).
3. Youcanuseknobs1–4toeditparametersthatare
assignedtothecontrolsurface.
Note: YoucanusetheCOMPAREbuttontocomparethe
soundyou’reeditingwiththeoriginaluneditedsound.
INC/DEC buttons
Usethesewhenyouwishtomakesmallchangesinthe
value.
VALUE dial
Usethisdialtoedittheselectedparameter’svalue.
Thiscontrolisconvenientwhenyouwanttoscroll
throughaverylonglistofselections.
Numeric keys 0–9, ENTER button, – button,
(.) button
Thesebuttonsareconvenientwhenyouknowthe
exactvaluethatyouwanttoenter.Usethe0–9,–,and
decimal(.)buttonstoenterthevalue,andthenpress
theENTERbuttontoconfirmtheentry.
The–buttoninvertsthesign(+/–)oftheparameter
value;thedecimal(.)buttoninsertsadecimal,for
enteringfractionalvalue
s.
Note: Whenselecting“ProgramSelect”(seepage 21),
youcanselectaGMbankbyholdingdownthe0
buttonandpressingthe(.),1–9,or–buttons.
Functions that use the ENTER button in conjunc-
tion with another button
ENTERhasafewspecialfunctionswhenitispressed
incombinationwithotherbuttons.
ByholdingdowntheENTERbuttonwhileyoupressa
numerickey(0–9),youcanselectuptotenmenu
commandsfromwithinthecurrentpage.
Whileadialogboxisdisplayed,theENTERbutton
correspondstotheOKbutton.(TheEXITbutton
correspondstotheCancelbutton.)
InSequencermode,youcanholddowntheENTER
buttonandpresstheLOCATE()buttontousethe
menucommandSetLocation.
Other
Specifying a program bank or combination bank
PROG BANK A, B, C, D, E, F/
COMBI BANK A, B, C, D buttons
Usethesebuttonstochangebankswhenselecting
ProgramsorCombinations.TheLEDsinthebuttons
lightuptoshowthecurrentbank.
InProgrammode,thesebuttonsselecttheProgram
bank.
InCombinationmode,thesebuttonshavetwo
functions:
•Whenyou’reselectingCombinations,theychoose
theCombinationbank.
•Whenyou’reassigningaProgramtoatimbre
withintheCombination,theyselecttheProgram
bank.
InSequencermode,whenatrack’
sProgramnameis
selected,thesebuttonschangetheProgrambank.
Using the keyboard to enter a note number or
velocity value
Byplayingakeywhilepressingaparameterthat
specifiesanotenumber(suchasG4orC#2)ora
velocityvalue,youcandirectlyenterthatnotenumber
orvelocityvalue.(Thisisnotavailableinmenu
commanddialogboxes.)
Tempo input
TEMPO knob, TAP button
YoucansetthetempobyturningtheTEMPOknobor
byrepeatedlypressingtheTAPbutton.
COMPARE button
Youcanusethisbuttontoreturnthesettingsofan
editedprogram,combination,orsongtotheiroriginal
state.Refertothefollowingsection.