Korg Krome

Recording Preparations for recording
59
Thisdialogboxisthesameastheonethatappearsfor
theCopyToTrack(P10:Pattern/RPPR–PatternEdit)
menucommand.
5. Inthe“Pattern”field,selectthepatternthatyou
wanttocopy.
IntheToTrackfield,selectthecopy‐destinationtrack.
IntheMeasurefield,specifythestartingmeasureof
thecopy‐destination.
Followingthepatternnameforeac
hofthe605preset
patterns,themusicalstyleandthenameofthemost
suitableDrumscategoryprogramarepartially
displayed.
Byloadingadrumstrackandthecorrespondingpreset
pattern,youcaninstantlysetupadrumtrack
appropriateforeachpresettemplatesong.
6. Toexecutethisoperation,presstheOKbutton.
Whenyouexecutethisprocedure,theMeasurefie
ld
willcountupautomatically,showinghowmany
measuresoftheselectedpatternhavebeenplacedin
theselectedsong.Youcanthencopyanotherpatternif
desired,oraddmoremeasuresofthesamepattern.
Whenyou’refinished,presstheExitbutton.
Copying the settings of a combination
or program
Youcancopythesettingsofacombinationorprogram
intothesequencer.
Thiscanbedoneinthefollowingways.
•AutoSongSetup
AutoSongSetupisafunctionthatcopiesthe
settingsoftheselectedcombination(in
Combinationmode)orprogram(inProgrammode)
tothesonginSequencermode.
•MenucommandsCopyFromCombiorCopyFrom
Program.(Seepages166,167oftheParame
ter
Guide)
InSequencermode,youcanusethesepagemenu
commandstocopythedesiredsettings.
Auto Song Setup function
1. EnterCombinationmode.
2. InP0:Playpage,selectthedesiredcombination
andedittheArpeggiatoretc.asdesired.
Note: Ifyouwanttosavetheeditedstateofthe
combination,usetheWriteCombinationmenu
commands.
3. PresstheREC(●)button.Alternatively,selectthe
pagemenucommand“AutoSongSetup.”
TheSetuptoRecorddi
alogboxwillappear.
4. ToexecutetheAutoSongSetupfunc
tion,pressthe
REC(●)buttonortheOKbutton.Ifyoudecide
nottoexecute,presstheCancelbutton.
YouwillautomaticallymovetoSequencermode,and
thesettingsofthecombinationwillbecopiedtothe
song.
Thefirstunusedsongwillbethecopy‐destination
song.
Contents automatically copied from a combi-
nation
Thecopiedcontentswillbethesameaswhenyou
executethemenucommandCopyFromCombiwith
thefollowingsettingsinthedialogbox.(Seepage 166
oftheParameterGuide)
• IFXs,MFXs,TFXchecked
• AutoAdjustArpsettingforMultiRECchecked
Contents automatically copied from a pro-
gram
Thecopiedcontentswillbethesameaswhenyou
executethemenucommandCopyFromProgramwith
thefollowingsettingsinthedialogbox.(Seepage 167
oftheParameterGuide)
• IFXs,MFXs,TFXchecked
• Arpchecked
• TosettoTrack01
• ArpsettoA
• withDrumTrackchecked
• To
:DrumTracksettoTrack10
•CheckRecordingSetupMultiREC
•SetthePlay/Rec/MutesettingtoRECfortracks01
and10(seepage 101oftheParameterGuide).
5. TheKROMEwillautomaticallyenterrecord‐ready
mode,andthemetronomewillsoundaccordingto
theMetronomesetting(Seepage 119ofthe
ParameterGuide).
6. PresstheSTART/STOP()buttontobegin
realtimerecording.Tostoprec
ording,pressthe
START/STOP()buttononceagain.