EasyManuals Logo

Korg pa 900 User Manual

Korg pa 900
450 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #123 background imageLoading...
Page #123 background image
119
Style Play mode
Effects: A/B FX Configuration
Reference
Effects: A/B FX Configuration
This page allows you to select the A (Style and Pads) and B (Key-
board) groups of effects. Please use theFX A andFX B side
tabs to switch from one group to the other one.
FX Groups (FX A, FX B)
Pa900 includes two groups of effects (FX A and FX B). There are
two master FXs for group. In Style Play mode, the A group is
reserved to the Style and Pad tracks, the B group to the Realtime
(Keyboard) tracks.
Master FX 1, 2
Effects assigned to the corresponding effect processors. Usually,
FX1 are reverbs, while FX2 are modulating effects (chorus,
flanger, delay…). For a list of the available effects, see in the
Appendix.
Effects assigned to both FX groups can be saved to a Perfor-
mance. Effect assigned to the FX A group (Style and Pad tracks)
can be saved to the Style Settings. Effects assigned to the FX B
group (Keyboard tracks) can be saved to an STS.
W/D
Use this parameter to set the amount of the effect (Wet) against
the non-effected (Dry) signal coming from the track.
MFX2 to MFX1
Amount of the MFX2 effect going back to the input of the MFX1
effect.
M.T. (Modulating Track)
Source track for modulating MIDI messages. You can modulate
an effect parameter with a MIDI message generated by an inter-
nal physical controller.
Effects: Master 1, 2
These pages contain the editing parameters for the four effect
processors. Here is an example of the FX A page, with the Reverb
Wet Plate effect assigned.
Selected effect
Select one of the available effects from this pop-up menu.
FX parameters
Parameters may be different, depending on the selected effect.
See the relevant chapter in the Appendix for a list of the available
parameters for each effect type.
Wet/Dry
Use this parameter to set the amount of the effect (Wet) against
the non-effected (Dry) signal coming from the track.
Src (Source)
Modulation source. To select the track generating this message,
see the “M.T. (Modulating Track)” parameters found in the
“Effects: A/B FX Configuration” page (see above). See the rele-
vant chapter in the Appendix for a list of the modulation
sources.
FX
group
Selected effect
FX parameters
FX group

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Korg pa 900 and is the answer not in the manual?

Korg pa 900 Specifications

General IconGeneral
Polyphony128 voices
Sequencer16-track sequencer
Keyboard61 keys (with velocity and aftertouch)
SoundsOver 1100 sounds, including GM and XG sets
StylesOver 400 styles
Display7-inch TouchView TFT display
StorageInternal memory and microSD card slot
Weight10.76 kg
MIDIIn, Out, Thru
USBUSB to Host, USB to Device
ConnectivityMIDI, USB

Related product manuals