Korg pa 900 User Manual

44
Playing Sounds
Raising or lowering the Upper octave
Raising or lowering the Upper octave
If all Upper tracks sound too high or too low, you can quickly change which octave they are playing
in.
1 Use the UPPER OCTAVE buttons on the control panel, to transpose all Upper tracks at
the same time.
Note: The Octave Trans-
pose value for each of the
keyboard track is shown
under the Sound’s name.
2 Press both UPPER OCTAVE buttons together to reset the octave to the value saved in
the current Performance.
i
Each time you press this button, the
pitch will be lowered by one octave.
Each time you press this button, the
pitch will be raised by one octave.

Korg pa 900 Specifications

General

Polyphony	128 voices
Sequencer	16-track sequencer
Keyboard	61 keys (with velocity and aftertouch)
Sounds	Over 1100 sounds, including GM and XG sets
Styles	Over 400 styles
Display	7-inch TouchView TFT display
Storage	Internal memory and microSD card slot
Weight	10.76 kg
MIDI	In, Out, Thru
USB	USB to Host, USB to Device
Connectivity	MIDI, USB