429
Installing the Korg USB MIDI Driver
Mac OS X: Installing the KORG USB-MIDI Driver
Appendix
Mac OS X: Installing the KORG USB-MIDI
Driver
1. Insert the included Accessory DVD into the optical drive of
your Mac.
2. If the DVD content does not appear on screen, double-click
the DVD icon to open a window in the Finder.
3. Open the folder /USB-MIDI Driver/Mac - KORG USB-
MIDI Driver v.n.nn/ and double-click on “KORG USB-
MIDI Driver v.n.n.n.dmg” to open a virtual drive in the
Finder (“n.n.n” meaning the version number).
4. Double-click on “KORG USB-MIDI Driver.pkg” to run the
installer.
5. Follow the instructions appearing on screen.
6. When installation is completed, eject the virtual drive, and
connect the DEVICE USB port of your Pa900 to one of the
USB ports of your Mac by using a standard USB cable.
Driver’s ports
After installation, the following ports will be shown in you MIDI
application (e.g., sequencer) among the other MIDI devices:
Pa900 KEYBOARD: This allows for reception of MIDI messages
from Pa900 (keyboard and controller’s data) to the MIDI appli-
cation running on the Mac.
Pa900 SOUND: This allows for transmission of MIDI messages
from the MIDI application running on the Mac, to the internal
tone generator of Pa900.
To Next Page
Loading...
Need help?
General
