Korg pa 900 User Manual

81
The SongBook
Selecting and using a Custom List
Quick Guide
Selecting and using a Custom List
After having created one or more Custom Lists, you can select one and use it for your show.
1 Touch the Custom List tab to select the Custom List page.
2 Use the List pop-up menu to select one of the available Custom Lists.
3 Select one of the Entries in the list (it turns blue), then touch the Select button in the
display to confirm selection (the selected Entry turns green). Press the PLAY button to
start playing back the selected Song.
Use the List pop-up menu to select
one of the available Custom Lists.
Touch Next to select the next Entry in the list.
(This command can also be assigned to an
Assignable Switch).
Touch Select to set the
highlighted Entry to play (if
different than the one auto-
matically selected).
Entry in play. To select a dif-
ferent one, highlight it and
touch the Select button in
the display.

Korg pa 900 Specifications

General

Polyphony	128 voices
Sequencer	16-track sequencer
Keyboard	61 keys (with velocity and aftertouch)
Sounds	Over 1100 sounds, including GM and XG sets
Styles	Over 400 styles
Display	7-inch TouchView TFT display
Storage	Internal memory and microSD card slot
Weight	10.76 kg
MIDI	In, Out, Thru
USB	USB to Host, USB to Device
Connectivity	MIDI, USB