87
Singing with a microphone
Balancing the voice, effects and tracks level
Quick Guide
Balancing the voice, effects and tracks level
When all effects have been set, you can balance your voice against the effects, the Styles and the Songs.
1 If you like, start a Style or Song.
2 Adjust the microphone’s final volume by using the MIC VOLUME knob.
The position of the MIC VOLUME knob is not saved to memory, so it remains consistent when
selecting different Styles, Performances, Songs or Voice Processor settings.
3 If you are using the Harmony function, adjust the level of the harmony voices by using
the “Harmony Level” parameter in the Mic panel of the main page.
By default, this control is also assigned to the ASSIGNABLE KNOB.
4 Set the voice effects’ level by using the dedicated FX LEVEL knob.
Soloing your voice (Talk)
Sometimes, during a live show, you might like to talk to your audience. Use the Talk function to atten-
uate the music, and let your voice pass through clean and clear.
1 While in the main page of the Style Play or Song Play mode, touch the Mic tab to see
Voice Processor’s settings.
2 During playback, turn the Talk function On.
3 Sing or talk into the microphone.
You’ll hear that then background music has been made softer, while your voice will be heard
loud and proud.
4 When done, turn the Talk function Off.
The background music returns to the original volume.
To Next Page
Loading...
Need help?
General
