18
Standby On/Off
STANDBY
Use this button to let the instrument exit (LED off)
or enter (LED on) standby.
Press it briefly to let the instrument exit standby. In case there
are User Sounds based on User PCM Samples, loading may take
some time.
Keep it pressed for about one second to let it enter standby.
War ning : When the instrument is in standby mode, it is still con-
nected to the power line. Accessing the inside of the instrument can
be dangerous. To completely disconnect the instrument from the
power, unplug the power plug from the power socket on the wall.
Note: To avoid wasting power, Pa900 will by default automatically
enter standby mode after two hours of non-active use (playing,
pressing buttons or using the touch-screen). Please save your data
(Performances, Styles, Songs, and so on) before taking a prolonged
pause. You can change the auto power-off timer in Global > Gen-
eral Controls > Clock & Power.