97
Recording a new Song (Standard MIDI File)
Preparing to record
Quick Guide
3 Select the Backing Sequence (Quick Record) option and touch OK to enter the Backing
Sequence Record mode.
Preparing to record
When you enter Backing Sequence Record, the most recently used Style is already selected, and all
tracks are ready to record. You could simply start recording as if you were playing in realtime with the
Styles. However, there are some settings that you may wish to edit.
• If you like, adjust any editable parameter in the display.
After choosing the Backing Sequence
(Quick Record) option, the Backing
Sequence Record page appears.
Touch the Style parame-
ter (or one the STYLE but-
tons) to open the Style
Select window, and
select a different Style (as
seen on page 55).
Track(s) status. ‘Rec’ means they are ready to
record. ‘Play’ means they are recorded and you
can hear them. ‘Mute’ means they cannot be
heard.
Measure counter. Nega-
tive numbers (-2, -1) are
the precount, after which
you can start recording.
Style’s Tempo. Change it,
if you like.
Grouped tracks. During Quick Record, you cannot access each separate Song
track. For ease of use, just two ‘master’ tracks are provided: Kbd/Pad (Key-
board/Pads) and Ch/Acc (Chord/Accompaniment). Use the ASSIGNABLE SLID-
ERS to separately adjust the volume of the Keyboard tracks.
Style’s Meter (time signa-
ture). You cannot change
it.
Touch the Perf/STS
parameter to open the
Performance Select win-
dow, and select a differ-
ent Performance (as seen
on page 51). As an alter-
native, you use the PER-
FORMANCE or STS
buttons.
To Next Page
Loading...
Need help?
General
