197
Sequencer operating mode
Write Global-Sequencer Setup dialog box
Reference
Delete Song
Select this command to delete the Song and create a new, blank
Song.
Delete Current Track
Select this command to delete the track currently selected in the
Track area (see “Track volume/status area” on page 177).
Solo Track
Select the track to be soloed, and check this item. You will hear
only the selected track, and the ‘Solo’ warning will flash on the
page header.
Uncheck this item to exit the Solo function.
Keep the SHIFT button pressed and touch one of the
tracks to solo it. Do the same on a soloed track to deactivate the
Solo function.
Copy/Paste FX
You can copy a single effect, or all effects of an FX group (A or
B). You can copy them between different Songs. The copy opera-
tion can only be carried on while remaining in Sequencer mode.
Note: This operation only copies the effect settings of the “Effects”
section. Parameters contained in other sections, like “Dry” or “FX
Send”, are not copied. Please note that these parameters can
change the way effects change the sound.
To copy a single effect:
1. Load the source Song, then
• go to the page of the single effect you want to copy (IFX 1,
IFX 2, IFX 3, Master 1, Master 2, Master 3), or
• go to the Effects > A/B FX Config page, to copy all effects.
This may be useful if you want to copy various effects into
different Songs, Performances, Styles or STSs.
2. Choose the “Copy FX” command from the page menu.
3. Load the target Song, then go to the page of the single effect
you want to paste (IFX 1, IFX 2, IFX 3, Master 1, Master 2,
Master 3).
4. Choose the “Paste FX” command from the page menu.
To copy all effects:
1. Load the source Song, then go to the Effects > A/B FX Con-
fig page, to copy all effects.
2. Choose the “Copy FX” command from the page menu.
3. Load the target Song, then go to the page of the Effects > A/
B FX Config page.
4. Choose the “Paste FX” command from the page menu.
Exit from Record
Only available in Record mode. Select this command to exit the
Record mode, and go back to the Main page of the Sequencer
Play mode (see “Sequencer Play - Main page” on page 173).
Write Global-Sequencer Setup dialog box
Open this window by selecting the Write Global-Song Setup
item from the page menu. Here, you can save MIDI Setups (see
“Midi Setup” on page 196), that are saved to the Global file.
Parameters saved in the Sequencer Setup area of the Global are
marked with the symbol through the user’s manual.
Song Select window
This window appears when you select the “Load Song” com-
mand from the page menu, or press the SONG SELECT button
in the PLAYER 1 sections on the control panel. See “Song Select
window” on page 106 for details.
Save Song window
The recorded Song is lost when turning the instrument off. The
Song is also lost when you overwrite it in Record mode, or if
you confirm the warning message when switching to the Style
Play or Song Play mode. You must save to a storage device any
Song you wish to preserve.
This window appears when you select the “Save Song” command
from the page menu.
Seq
To Next Page
Loading...
Need help?
General
