196
Sequencer operating mode
Preferences: Sequencer Setup
Preferences: Sequencer Setup
In this page, you can select a MIDI Setup and the Harmony track
for the Sequencer mode.
Note: These settings are stored in the Sequencer Setup area of the
Global file. (Parameter of this kind are marked with the
abbreviation through the manual). After changing these settings,
select the Write Global-Sequencer Setup command from the page
menu to save them to the Global.
Midi Setup
MIDI channels for the Sequencer mode can be automatically
configured by selecting a MIDI Setup with this parameter. See
“MIDI Setup” on page 210 for more information on using MIDI
Setups.
Note: To automatically select a MIDI Setup when entering the
Sequencer mode, select the Write Global-Sequencer Setup com-
mand from the page menu.
For detailed information on preloaded MIDI Setup settings, see
“MIDI Setup” on page 238.
Note: After selecting a MIDI Setup, you can go to the Global mode
and apply any change to each channel setting. To store these
changes to a MIDI Setup, while still in Global mode select the
Write Global-Midi Setup command from the page menu. All MIDI
Setups can be freely customized and overwritten.
Hint: To restore the original MIDI Setups, use the “Factory
Restore” command (page “Utility” of the Media mode, see
page 236). War ni ng : This procedure will erase all Factory and
User data from the internal memory.
Harmony Track
The Voice Processor gets the chord notes from the track selected
with this parameter.
Hint: Go to the Voice Processor Preset section of the Global mode
to try different Voice Processor Presets while creating or editing a
Song.
Off No track sends notes to the Harmony module of
the Voice processor. Chords can still be received
from the MIDI IN.
Ply.1-Track 1…16
Chords are sent from one of Player 1 tracks.
Page menu
Touch the page menu icon to open the menu. Touch a command
to select it. Touch anywhere in the display to close the menu
without selecting a command.
Write Global-Player Setup
Select this command to open the Write Global-Player Setup dia-
log box, and save global settings that are unique to the Sequencer
mode. (See “Write Global-Sequencer Setup dialog box” on
page 197).
Load Song
Select this command to open the Song Select window, and load a
Song to the sequencer. (See “Song Select window” on page 197).
Save Song
Select this command to save the new or edited Song to a storage
device as a Standard MIDI File. The file is automatically added
the “.MID” extension. After selecting this command, the Save
Song page appears (see “Save Song window” on page 197).
War ni ng : Turning the instrument off will delete the Song from
memory. Save your Song to a storage device to avoid losing it.
War ni ng : The Song is also lost when switching from Sequencer to
Style Play or Song Play mode, without previously saving the Song
to a storage device.
Undo
When selecting this command, the latest operation is canceled,
and data are reverted to the previous situation.
Overdub Step Recording
Only available in Record mode. Select this command to enter
Overdub Step Record mode. This recording mode lets you enter
events one at a time, adding events to the existing events. (See
“Record mode: Step Record page” on page 178).
Overwrite Step Recording
Only available in Record mode. Select this command to enter
Overwrite Step Record mode. This recording mode lets you
enter events one at a time, overwriting all existing events. (See
“Record mode: Step Record page” on page 178).
Seq
Seq
To Next Page
Loading...
Need help?
General
