52
Selecting and saving Performances
Saving your settings to a Performance
2 Select one of the Performances in the Performance Select window, then press the EXIT
button to close the window.
Note: Selection windows
may automatically close
after a selection. To do this,
uncheck the “Display Hold”
box in the Global > General
Controls > Interface page. In
this case, press the EXIT but-
ton only if you don’t make
any selection but want to
close the window.
3 Play the keyboard.
Note: If the
LED of the
STYLE CHANGE
button is
turned on,
selecting a Performance may
automatically select a differ-
ent Style and its settings
(Sounds, Effects, Drawbar
settings for the Style
tracks…)
Saving your settings to a Performance
All the control panel settings, plus the Keyboard track settings, selected effects and Voice Processor
Preset, can be saved to a single Performance, to be quickly recalled at a later time.
Note: To open the Write
Performance dialog box, you
can press the SHIFT + one of
the PERFORMANCE SELECT
buttons.
1 Touch the page menu icon to open the page menu.
The Performance Select window
closes, and the main screen appears
again. Sounds, Effects, and other
settings, change according to the
setting memorized in the selected
Performance.
Settings memorized in the selected Performance have been
selected. Sounds, effects and other settings have been recalled.
To Next Page
Loading...
Need help?
General
