189
Sequencer operating mode
Effects: A/B FX Configuration
Reference
Effects: A/B FX Configuration
This page allows you to select the A (usually Song) and B (Key-
board, optionally Song) groups of effects. Please use the “FX A”
and “FX B” side tabs to switch from one group to the other one.
The effect types and the FX matrix are the same seen for the
Style Play mode (see “Effects: A/B FX Configuration” on
page 125).
Note: When you stop the Song, or select a different Song, the
default effects are selected again. You can, however, stop the Song,
change the effects, then start the Song again. Save the Song to per-
manently change the effects.
FX Group
Use these side tabs to choose the FX group (A or B) for the cor-
responding track.
Pa3X includes two groups of effects (FX A and FX B). While in
Song Play mode, the A group is reserved to the Song and Pad
tracks, the B group to the Realtime (Keyboard) tracks.
However, Songs created in Sequencer mode could also assign the
B group to the Song tracks.
Parameters
All parameters in this page are the same found in the same page
of the Song Play mode (see “Effects: A/B FX Configuration” on
page 154).
Effects: IFX 1…3, Master 1…3
These pages contain the editing parameters for the effect proces-
sors. Here is an example of the FX A page, with the Reverb Hall
effect assigned.
Selected effect
Select one of the available effects from this pop-up menu. This is
equivalent to the “FX Group” parameters found in the “Effects:
A/B FX Configuration” page (see above).
Parameters
Parameters may differ, depending on the selected effect. See the
“Advanced Edit” addendum in the Accessory CD for a list of
available parameters for each effect type.
Track Controls: Mode
Parameter
See “Track Controls: Mode” on page 127.
Track Controls: Drum Edit
Parameter
See “Track Controls: Drum Edit” on page 128.
Track Controls: Easy Edit
Parameter
See “Track Controls: Easy Edit” on page 129.
To Next Page
Loading...
Need help?
General
