57
Selecting and playing Styles
Tempo
Quick Guide
Tempo
While a Tempo setting is saved with each Style or Performance, you can change it to be whatever you
like. You can use either of the following two methods.
Hint: As an alternative to
using the TEMPO buttons,
hold the Tempo value in the
display, then move your fin-
ger up/down or left/right (or
change the value with the
VALUE controls).
• Use the TEMPO + or – buttons to change the Tempo value.
• Press the TEMPO– and + buttons together to recall the saved Tempo value.
• As an alternative, keep the SHIFT button pressed, and use the DIAL to change the
Tempo. The selected tempo will be shown in a small window.
Intro, Variation, Fill, Break, Ending
When playing Styles, you can select various “Style Elements” to make your playing richer. A Style is
made of three Intros (or two Intros and a Count-In), up to four basic patterns (Variations), four Fills,
a Break, and three Endings.
1 Make sure the SYNCHRO-START LED is turned on (otherwise, press the button to turn it
on).
Activating the Synchro Start function is not mandatory, but it might be handy.
2 Press one of the INTRO buttons to set the corresponding Intro to play.
i
To Next Page
Loading...
Need help?
General
