237
Media edit mode
Preferences
Reference
Preferences
This page includes various settings for the Media mode.
Hard Disk Protect
When on, this parameter protects the hard disk or flash-memory
SSD (HD device) from writing.
Note: This parameter is saved to memory, but not to a storage
device.
Global Protect
When loading a “.SET” file (see “Loading all the User data” on
page 226), this parameter (if On) prevents Global parameters
from being reprogrammed when loading all data. All Global
parameters are therefore left unchanged.
When loading a single “.GLB” file, this parameter is ignored, and
the Global is overwritten by the loaded data.
Note: This parameter is saved to memory, but not to a storage
device.
Factory Style and Pad Protect
When On, this parameter protects the Factory Styles (from the
“POP” to the “CONTEMP.” bank) and Factory Pads (named
“Hit” and “Sequence” in the Pad Select window) from being
overwritten when loading data from a device. Furthermore, you
can’t access these banks when saving data.
Also, when this option is checked, you cannot write any STS
(Single Touch Setting) or Style Settings onto Factory Styles. The
“Write Single Touch Setting” and “Write Current Style Settings”
command in the page menu are greyed out and cannot be
selected. All original settings of the Factory Styles will be left
untouched.
When Off, you can load or save User Styles or Pads even into the
Factory Style banks (from “POP” to “CONTEMP.”) and Factory
Pad banks (named “Hit” and “Sequence” in the Pad Select win-
dow). This way, you customize personalize your Factory Style
and Pad banks.
Please note that the Save All procedure always saves only the
USER and FAVORITE Style banks.
Note: This parameter is automatically set to On when turning the
instrument off.
Note: Should you accidentally delete some Factory Data, reload
the Backup data or use the Factory Restore procedure (Media >
Utility).
Factory Sound Protect
When On, this parameter prevents writing edited Sounds from
the Edit Sound mode. When Off, you can freely save edited
Sounds either in the Factory or User Sound area.
Wa r ni n g: Use this feature with great care! Reorganizing the Fac-
tory Sounds may make both Styles and Standard MIDI Files sound
with the wrong Sounds!
Note: This parameter is automatically set to On when turning the
instrument off.
Note: Should you accidentally delete some Factory Data, reload
the Backup data or use the Factory Restore procedure (Media >
Utility).
Hide Unknown Files
When this option is checked, non-proprietary files are hidden
when using Media operations, therefore making browsing direc-
tories easier.
Force PCM Reload
When the backup battery gets discharged, or in any case in
which you notice Samples are not sounding good, you should
use this command to force reloading of PCM Samples.
To Next Page
Loading...
Need help?
General
