128
Style Play operating mode
Track Controls: Drum Edit
trol Change 32 (Bank Select LSB), PC is the Pro-
gram Change:
When touching the Sound area, the numeric key-
pad appears, instead of the Sound Select window.
You can enter the Control Change/Program
Change bundle shown above, separating the three
parts with a dot (.).
Both The track plays both the internal sounds and an
external instrument connected to the MIDI OUT.
Type
Drum Drum/Percussion track. Set a track to Drum
mode if you wish to separately adjust the volume
and set a different output for each percussive
family of the assigned Drum Kit Sound. (See
“Track Controls: Drum Edit” on page128, and
“Audio Setup: Style/Kbd” on page 213).
Note: Tracks set to Drum or Percussion mode while
in Style Record (see “Track Type” on page 27), can-
not be edited here. This option appears in grey.
Other Style tracks cannot be set to Drum mode
here.
Poly Tracks of this kind are polyphonic, i.e. they can
play more than one note at the same time.
Mono Tracks of this kind are monophonic, i.e. each new
note stops the previous note.
Mono Right A Mono track, but with priority assigned to the
rightmost (highest) note.
Mono Left A Mono track, but with priority assigned to the
leftmost (lowest) note.
Play/Mute icon
Track’s play/mute status.
Play status. The track can be heard.
Mute status. The track cannot be heard.
Track Controls: Drum Edit
In this page you can adjust the volume and edit the main param-
eters for each family of Drum and Percussion instrument for the
selected track. A list of families is shown below.
These parameters can be accessed only on tracks set to the Drum
mode (see above). Use them on tracks with a Drum Kit assigned,
or you will not be able to hear any change.
Hint: Use the TRACK SELECT button to cycle between the track
groups. After selecting a track, choose the “Solo Track” command
from the page menu to avoid listening to the other tracks during
editing.
Note: All values are referred to the value of the original Sounds.
Family Select
Use these icons/buttons to select the drum family you want to
edit. These buttons are only accessible when you select a Drum
track.
Overview of the current parameter
Under the icons of the Drum families you can see the value of
the selected parameter for all the families. This will let you com-
pare the value of the selected family with all the others. The val-
ues are shown in grey (non editable).
CC#0 value
CC#32 value
PC value
Set
Set
Drum family icon Drum family
Kick drums
Snare drums
Toms
Hi-Hat cymbals
Ride, Crash and other cymbals
Low-pitched percussions
High-pitched percussions
Special effects
To Next Page
Loading...
Need help?
General
