65
Selecting and playing Styles
The Chord Sequence
Quick Guide
The Chord Sequence
In case you need both hands free for playing a solo while a Style is playing, you can record a Chord
Sequence and let Pa3X play the chords for you.
1 Press the START/STOP button to set the Style to play.
2 Press the BASS INVERSION and MANUAL BASS (RECORD) buttons together to start
recording.
3 Start recording your Chord Sequence at the beginning of the next measure.
While recording, you will see a red flashing icon in the display.
4 Play the chords in the Chord Scan area.
5 When the Chord Sequence is done, press the BASS INVERSION and MANUAL BASS
(RECORD) buttons together again to stop recording.
6 Press the MEMORY and BASS INVERSION (PLAY/STOP) buttons to start playback.
The LED of the two buttons will start flashing. The Chord Sequence will be played back in loop
starting from the next measure. Recorded chords will be sent to the arranger, and the Style will
play with the recorded chords.
7 Play your solo part, while the Chord Sequence plays the chords for you.
During Chord Sequence looping, you can freely select any Fill or Variation, as if you where play-
ing chords with your hands.
To Next Page
Loading...
Need help?
General
