213
Global edit mode
MIDI: Filters
Reference
MIDI: Filters
Use this page to set up to 8 filters for the MIDI data received or
sent by the Pa3X on the MIDI and USB Device ports.
Midi In Filters
Selected MIDI IN filters.
Off No filter.
Pitch Bend Pitch Bend.
MonoTouch Mono (or Channel) After Touch.
PolyTouch Poly After Touch.
PrgChange Program Change.
SysExcl System Exclusive.
All CC All Control Change messages.
0…127 Control Change message #0…127. See “MIDI
Data” on page 245 for a list of available Control
Change messages.
Notes Note events.
Midi Out Filters
Selected MIDI OUT filters. See above for information on each
filter type.
Audio Setup: Style/Kbd
This page lets you connect Style, Keyboard and Pad tracks to the
audio outputs.
Tracks
Use these parameters to assign an audio output (OUTPUT sec-
tion, on the back of the instrument) to each track.
Left + Right The selected track is connected to the Left &
Right outs, in stereo. The track is also sent to the
Internal FX processors. You can use the MASTER
VOLUME slider to set the volume.
The track is also sent to the S/PDIF Digital Out.
However, the MASTER VOLUME slider has no
effect on this output.
Out 1 + 2 The track is connected to the 1 & 2 sub-outs, in
stereo. It is not sent to the Internal FX processors.
The MASTER VOLUME slider has no effect on
it.
The track is not sent to the S/PDIF Digital Out.
Out 1 The selected track is connected to the sub-out 1.
It is mixed to mono. It is not sent to the Internal
FX processors. The MASTER VOLUME slider
has no effect on it.
The track is not sent to the S/PDIF Digital Out.
Gbl
Tra ck
Internal FX
Tra ck
Internal FX
Tra ck
Internal FX
To Next Page
Loading...
