214
Global edit mode
Audio Setup: Player 1
Out 2 The selected track is connected to the sub-out 2.
It is mixed to mono. It is not sent to the Internal
FX processors. The MASTER VOLUME slider
has no effect on it.
The track is not sent to the S/PDIF Digital Out.
Audio Setup: Player 1
This page lets you connect Player 1 tracks to the audio outputs.
These setting are also applied to the Sequencer mode.
Tracks
Use these parameters to assign an audio output (OUTPUT sec-
tion, on the back of the instrument) to each track.
See “Audio Setup: Style/Kbd” on page 213 for more information
on the available audio outputs.
Audio Setup: Player 2
This page lets you connect Player 2 tracks to the audio outputs.
Tracks
Use these parameters to assign an audio output (OUTPUT sec-
tion, on the back of the instrument) to each track.
See “Audio Setup: Style/Kbd” on page 213 for more information
on the available audio outputs.
Audio Setup: Drums
This page lets you route Drum Kit Sounds to the audio outputs.
See “Audio Setup: Style/Kbd” on page 213 for more information
about the available audio outputs.
Drum Kit Output
This parameter lets you decide if Drum Kit Sounds will be sent
to the single output (or output pair) defined for the track they
are assigned to, or each drum category will be sent to a different
output.
As Track When this option is selected, Drum Kits will be
sent to the output selected in one of the previous
pages for the tracks they are assigned to.
As Drum Category
When this option is selected, you can select a dif-
ferent output for each category of Drum Kit
sounds. Use the “Drum Kit Category” box below,
to select an output for each category of percussive
sounds.
Drum Kit Category
Kick Bass Drum category.
Snare Snare Drum category.
Tom Tom categor y.
Hi-Hat Hi-Hat category.
Cymbal Cymbal category.
Perc.1 Low-pitched percussion category.
Perc.2 High-pitched percussion category.
Special FX Sound FX category.
Tra ck
Internal FX
To Next Page
Loading...
Need help?
General
