Korg Pa3X 76-keys User Manual

56
Selecting and playing Styles
Selecting and playing a Style
2 Select a Style from the Style Select window.
Note: Selection windows
may automatically close
after a selection. To do this,
uncheck the “Display Hold”
box in the Global > General
Controls > Interface page. In
this case, press the EXIT but-
ton only if you don’t make
any selection but want to
close the window.
3 Be sure one of the Chord Scan modes is selected.
4 Press the SYNCHRO-START button to turn its LED on.
Note: You could simply
press START/STOP to start the
Style, but the Synchro-Start
function allows you to make
the Style start in sync with
your playing on the key-
board. Therefore, it may be
considered a “more musical”
way of starting a Style.
5 Play the keyboard.
6 Press START/STOP to stop the Style.
The Style Select window closes, and
the main screen appears again, with
the selected Style ready to go.
i
For chord scanning to work, either of both LEDs must be turned
on. Lower: chords are recognized on the left of the split point;
Upper: chords are recognized on the right of the split point; Full
(both LEDs on): chords are recognized on the whole keyboard.
Off: only the Drum track can be heard.
i
When the Syncho-Start function is turned on, the Style starts
playing as soon as you play a note or chord in the chord recogni-
tion area. Play chords with your left hand, and the melody with
your right hand. The arranger will follow your playing.

Korg Pa3X 76-keys Specifications

General

Brand	Korg
Model	Pa3X 76-keys
Category	Electronic Keyboard
Language	English