265
Appendix
Media related problems
Cannot format a device Is the USB cable correctly connected?
Is the USB device correctly powered?
Is the device inserted correctly?
Is the write protect tab of the disk in the protect position?
Cannot save data to a device Is the device formatted? 235
Is the device inserted correctly?
Is the write protect tab of the disk in the protect position?
Cannot load data from a device Is the device inserted correctly?
Does the device contain data compatible with the Pa3X? 223
The message “Over Current Condition
Detected on USB port: please remove
the USB media” appears in the display
The USB device is probably defective, due to a short circuit, and cannot be used. While this will not damage
the Pa3X, it is advisable to remove the device.
Problem Solution Page
To Next Page
Loading...
