74
Song Play
Removing the voice from an MP3 file
Press the MENU button, and choose the “Pad/Assignable Switch” section. Then touch the
Switch tab to open the “Switch” page. While in this page, assign the Vocal Remover function to
the ASSIGNABLE SWITCH 2:
2 Press the EXIT button to return to the main page of the Song Play mode.
3 Assign an MP3 file to one of the players.
Note: The Vocal Remover
only works on a single player
at a time. To switch from a
player to the other, please use
the X-FADER.
4 Start the player with the MP3 Song assigned.
5 Press the ASSIGNABLE SWITCH 2 to activate the Vocal Remover, and remove the origi-
nal singer’s voice.
Listen to how the original singer’s voice is reduced or totally removed.
6 Keep the SHIFT button pressed and press the SONG PLAY button to open the “Prefer-
ences: General Setup” page.
7 Experiment with the various settings of the “MP3 Vocal Remover Preset”.
Each setting is optimized for a particular kind of voice. Find the one that better fit the original
singer’s voice.
8 When done, press the ASSIGNABLE SWITCH 2 to deactivate the Vocal Remover, and
make the original singer’s voice appear again.
9 Stop the player.
To Next Page
Loading...
Need help?
General
