45
Selecting and playing Styles
Selecting and playing a Style
Quick Guide
Selecting and playing a Style
1 Touch the Style area in the display. The Style Select window appears.
Note: You can open
the Style Select window
also by pressing one of
the buttons in the STYLE
SELECT section. This will
let you jump directly to
the desired Style bank.
Note: You
can leave the
Style Select
window open
in the display, even after
selecting a Style. Just
press the DISPLAY HOLD
button to turn its LED
on. In this case, press the
EXIT button to exit from
a window.
2 Select a Style from the Style Select window.
3 Be sure one of the Chord Scanning modes is selected.
i
PIANO E.PIANO
MALLET
& BELL
ACCORDION ORGAN
DIGITAL
DRAWBARS
GUITAR
STRINGS &
VOCALS
TRUMPET &
TROMBONE
BRASS
1234567890
SAX WOODWIND SYNTH 1 SYNTH 2 BASS DRUM & PERC SFX USER 1 USER 2 USER DK
The selected Style is highlighted.
Touch a Style’s name to select it.
Touch one of the side tabs to
select a different Style bank.
Touch one of the lower tabs to
select a different Style page.
Set of banks. [1/10] corresponds to the top row
of Styles on the control panel, [11/20] to the
lower row, [Favorite] to the Favorite Styles.
DISPLAY
HOLD
i
The Style Select window closes,
and the main screen appears
again, with the selected Style
ready to go.
UPPER
LOWER
FULL
CHORD SCANNING
For chord scanning to work, either of both LEDs must be
turned on. Lower: chords are recognized on the left of the
split point; Upper: chords are recognized on the right of
the split point; Full: chords are recognized on the whole
keyboard. Off: only the Drum track can be heard.
To Next Page
Loading...
Need help?
General
