168
Song Play operating mode
Edit menu
Edit menu
From any page, press the MENU button to open the Song Play
edit menu. This menu gives access to the various Song Play edit
sections for the currently selected sequencer (see “Songs area”
on page 161).
When in the menu, select an edit section, or press EXIT or
SONG PLAY to exit the menu.
When in an edit page, press the EXIT or SONG PLAY button to
go back to the main page of the Song Play operating mode.
Each item in this menu corresponds to an edit section. Each edit
section groups various edit pages, that may be selected by touch-
ing the corresponding tab on the lower part of the display.
Note: Some of the edit parameters are only meant for realtime. To
see which parameters are saved in the Performance, STS or Global-
Song Play Setup and which are not, see the “Parameters” chapter
on page 344.
As a general rule, Keyboard track parameters can be saved in a Per-
formance or SongBook STS, while Song track parameters could be
saved in the Global-Song Play Setup.
Edit page structure
All edit pages share some basic elements.
Operating mode
This indicates that the instrument is in Song Play mode.
Selected sequencer
Before entering edit, select one of the two sequencers, by using
the Song area of the main page (see “Switching between
sequencers during editing” below).
Edit section
This identifies the current edit section, corresponding to one of
the items of the edit menu (see “Edit menu” on page 168).
Page menu icon
Touch this icon to open the page menu (see “Page menu” on
page 178).
Parameters area
Each page contains various parameters. Use the tabs to select
one of the pages. For detailed information on the various types
of parameters, see sections starting from page 169.
Tabs
Use tabs to select one of the edit pages of the current edit section.
Switching between sequencers during
editing
When you enter Edit mode, you can edit the selected sequencer’s
parameters. The selected sequencer is always shown on the page
header.
To select a sequencer, go to the main page of the Song Play
mode, and select the sequencers you wish to edit. The selected
sequencer is shown with a white background.
Operating mode
Selected
sequencer
Selected
track info
Page menu
icon
Parameters
area
Tabs
Edit section
To Next Page
Loading...
Need help?
General
