316
Assignable parameters
List of Assignable Pedal and Assignable Slider (A/B) functions
List of Assignable Pedal and Assignable
Slider (A/B) functions
The following functions can be assigned to a continuous pedal
or to the Assignable Sliders (in A or B mode).
Glide When the pedal is pressed, affected
notes on Upper tracks are bent down,
according to settings for the Pitch Bend
on the same tracks. When the pedal is
released, notes return to the normal
pitch, at the speed defined by the
“Time” parameter (see “Glide” on
page 216).
Audio In Mute
Microphone Talk Turns all Voice Processor effects down, to
let you address the audience. See “Voice
Processor Setup: Talk” on page 234.
Mic Lead On/Off Momentary switch controls assigned to
the Voice Processor. Press to activated,
release to deactivate.
Mic Harmony On/Off
Mic Effects On/Off
Mic Latch On/Off
FX CC12 Switch
Standard FX controllers
FX CC13 Switch
Rotary Spkr On/Off
Rotary Spkr Fast/Slow
Drawbar Perc On/Off
Drawbar Noise On/Off
Text Page Up These options let you move to the previ-
ous or next page, when reading a text
file loaded with a Song (see “Text files
loaded with Standard MIDI Files and MP3
files” on page 164) or Song Book entry
(see “Lyrics as text files associated to a
SongBook entry” on page 186).
Text Page Down
SongBook Next Moves to the next SongBook entry in the
selected Custom List.
Pad 1
Same functions of the control panel but-
tons with the same name
Pad 2
Pad 3
Pad 4
Pad Stop
Sound Controller 1 To be used as triggers for two DNC
parameter (transmit CC#80 or CC#81).
When these functions are assigned to
the selected physical controller, this lat-
ter becomes the corresponding Sound
Controller (Sound Controller 1 or Sound
Controller 2). You can then use this
Sound Controller to control any of the
DNC parameters.
Sound Controller 2
Function Meaning
Function Meaning
Off No function assigned
Master Volume
Keyboard Expression
Joystick +X Joystick right
Joystick -X Joystick left
Joystick +Y Joystick forward
Joystick -Y Joystick backward
Upper VDF Cutoff Filter cutoff (for Sounds assigned to the
Upper tracks)
Upper VDF Resonance Filter resonance (for Sounds assigned to
the Upper tracks)
Mic In Volume
Mic Lead Voice Volume Continuous controls assigned to the
Voice Processor.
Mic Harmony Output
Volume
Mic Lead to Delay
Mic Harmony to Delay
Mic Reverb Level
Mic FX Level
Mic EQ Gain Low
Mic EQ Gain Med
Mic EQ Gain Low
FX CC12 Ctl
Standard FX controllers
FX CC13 Ctl
Pad Volume With this function assigned, you can
control the proportional volume of all
four Pads at the same time. Please note
that the status of the Pad’s volume, after
having been modified with a pedal or
slider, is made current, and will be saved
in a Performance or STS by using the rel-
evant Write procedure.
To Next Page
Loading...
