320
MIDI Data
Program Change messages used as remote commands
Program Change messages used as remote commands
The following is a table including all Program Change messages, used as remote Style and Sequencer controls. These messages are to be
sent on the Control channel (see “MIDI: MIDI In Channels” on page 225).
Note: The above Program Change numbers are given according to the 0-127 numbering system.
Control Change and Program Change message used as remote commands
The following is a table including all Control Change + Program Change messages, used as remote Style and Player controls. These
messages are to be sent on the Control channel (see “MIDI: MIDI In Channels” on page 230). If a Style is already selected, just send the
Program Change message.
PC Function PC Function PC Function PC Function PC Function
Style Elements
80
Intro 1
81
Intro 2
82
Intro 3/Count In
83
Variation 1
84
Variation 2
85
Variation 3
86
Variation 4
87
Fill 1
88
Fill 2
89
Fill 3/Break
90
Ending 1
91
Ending 2
92
Ending 3
Style and Sequencers Control
93 Fade In/Out 94 Memory 95 Bass Inversion 96 Manual Bass 97 Tempo Lock
98 Single Touch 99 Style Change 100
Start/Stop (Style)
101
Play/Stop (Seq 1)
102
Play/Stop (Seq 2)
CC#0 CC#32 PC STS PC STS PC STS PC STS
The same as the Style to which the STS belongs 64 STS 1 65 STS 2 66 STS 3 67 STS 4
To Next Page
Loading...
Need help?
General
